Clear Float Glass Tinted Float Glass Reflective Coated Glass Low-emissivity Coated Glass Insulated Glass Units Performance Data and Technical Support Laminated Safety Glass Toughened Safety Glass Ceramic Fritted and Spandrel Glass Mirror Glass Patterned and Feature Glass Edgework and Processing Frameless Glass Installations Noise Control Using Glass Specialty Products Stocklines and Discontinued Glass Index

CLEAN CUT Edges are cut clean as the cutter cuts the glass. Edges are sharp. ROUGH ARRISS (STANDARD ARRISS) OGEE This edge is produced by a rough stone, wet belt or split arriss diamond wheel. The edge of the glass is left with a white arrissed edge. This type of edge is typically used for for toughened glass. This type of finish is produced on a CNC machine leaving a polished edge. It is available only on 10mm and 12mm glass. It is suitable for furniture, features and decorative panels. SMOOTH ARRISS TRIPLE Not available. Refer “Flat Polish”. This type of finish is produced on a CNC machine leaving a polished edge. Available only on 12mm and 15mm glass. Suitable for furniture, features and decorative panels. FLAT GRIND MITRE This edge is produced on a straight line rectilinear or CNC machine leaving a diamond smooth unpolished finish. It is the normal type of finish for silicone butt glazing. It is available on glass thicknesses of 3mm and over. Rectilinear machines produce mitred edges with a ground or polished edge. These edges are used for glass silicone butt joints at all angles and exposed edges. They are available on thicknesses of 6mm and over. FLAT POLISH BEVEL This is the standard edge produced by a straight line rectilinear or CNC machine and produces a fine polished flat edge suitable for all furniture glass and frameless toughened panels. Bevelled edges are produced on specialty machinery at various widths dependent on glass thickness. They are suitable for mirrors, furniture, feature and decorative panels. They are available on thicknesses of 4mm and over. Refer sales staff for minimum residual edge thickness. ROUND AND POLISH DOUBLE BEVEL This type of finish is available only on 6mm, 10mm and 12mm glass, with a minimum 200mm diameter and a maximum 2000mm diameter. This type of finish is available only on request.   Edgework Ordering mitred glass Bevelled edge guidelines   Straight line bevelling   Shape bevelling Hole guidelines Cut-out guidelines A large variety of edgework finishes are available on our rectalinear or CNC (Computer Numerically Controlled) fully automated processing machines.

PROFILE | PRODUCTS | LOCATIONS | MEET US | TOUR | CONTACT